Heat Press Instructions

Ready to press? Choose your transfer type below and follow the matching instructions for your 345 Prints transfers.

Regular DTF   ·   Glitter DTF

Regular DTF transfers

Your quick guide to a beautiful press.

Press settings at a glance
Temperature 325°F
Press time 15 seconds
Pressure Firm
Peel Cool for 30 seconds, then peel
Final press 5 seconds, covered

Step by step

  1. Set your press. Set your heat press to 325°F with a 15-second timer.
  2. Pre-press. Press the garment for 5 seconds to remove moisture and wrinkles.
  3. Place and press. Place the transfer on the garment, design side up. Cover with parchment paper or a Teflon sheet, then press with firm pressure for 15 seconds.
  4. Cool, peel, and finish. Let the transfer cool for 30 seconds, then peel the film. Cover again with parchment paper or a Teflon sheet and repress for 5 seconds.
  5. Wait before washing. Allow 24 hours before the first wash.

Glitter DTF transfers

For glitter & chameleon film, as shown on your 345 Prints instruction sheet.

Press settings at a glance
Temperature 325°F
Press time 30 seconds
Pressure Firm
Peel Cool for 30 seconds, then peel
Final press 5 seconds, covered

Step by step

  1. Set your press. Set your heat press to 325°F with a 30-second timer.
  2. Pre-press. Press the garment for 5 seconds to remove moisture and wrinkles.
  3. Place and press. Place the transfer on the garment, design side up. Cover with parchment paper or a Teflon sheet, then press with firm pressure for 30 seconds.
  4. Cool, peel, and finish. Let the transfer cool for 30 seconds, then peel the film. Cover again with parchment paper or a Teflon sheet and repress for 5 seconds.
  5. Wait before washing. Allow 24 hours before the first wash.

Care for your finished garment

  • Wait 24 hours before washing.
  • Wash inside out in cold water.
  • Tumble dry low or hang dry.
  • Avoid bleach and high heat.

Need a hand with your transfer? Contact 345 Prints. We’re happy to help.